Post by bcoates54 on Mar 15, 2011 12:26:57 GMT -7
2003 Buller Velocity
Chassis is fully adjustable front and rear, great condition hardly scratched powder coat,
Has 2 race old gibbs concept wedge with a new fiberglass light weight nose.
Has a carbon fiber seat that cost 300$new only has a few wholes
A couple race old CRE kt100 lots of life on great motor, with a new joes jackshaft the best jackshaft there are and its only a couple race old(cost about 300$).
A Birky clutch 1 race old from Rene Angel rebuilt cost was $450, these are the best clutches by a long shot I have ran all kinds of clutches wet and dry these are the best most consistent, with no maintenance week to week like dry clutches just change fluid once a weekend and go.
This kart is one of the bes around I love this chassis It has won a ton of races in Yamaha heavy and light. and the last heavy Championship at oakwood(Jared Alseth driving it) I also finished 2nd the one race I ran it in open at oakwood with a competitive field). Also finished 3rd at the Big Kahuna after switching to this chassis after I lost my brakes on my other chassis so if I would have time to adjust the chassis a little more I would have had a chance to win.
This kart is a proven winner with multiply drivers on it the motors is the second highest hp number for a Yamaha I have ever had and the chassis is the most forgiving chassis I have ever raced it has all the best stuff on it you wont find a better kt100 kart around and the motor came from mike Collins who is the best motor builder around and maybe in the country. So for 1800$ your stealing it you couldn't build a copy for near that
It would cost 2003 Buller chassis $800 kt100 and pipe and carb $800, clutch $450, jack shaft with belt drive $350, wedge body and nose 350$ seat 250$ tires and wheels at least $200 aluminum fuel tank 60$ new brakes 200$
thats well over 3000$ to copy and this stuff is all like new
$1800 race ready is a steal
Billy 206-601-5387
Chassis is fully adjustable front and rear, great condition hardly scratched powder coat,
Has 2 race old gibbs concept wedge with a new fiberglass light weight nose.
Has a carbon fiber seat that cost 300$new only has a few wholes
A couple race old CRE kt100 lots of life on great motor, with a new joes jackshaft the best jackshaft there are and its only a couple race old(cost about 300$).
A Birky clutch 1 race old from Rene Angel rebuilt cost was $450, these are the best clutches by a long shot I have ran all kinds of clutches wet and dry these are the best most consistent, with no maintenance week to week like dry clutches just change fluid once a weekend and go.
This kart is one of the bes around I love this chassis It has won a ton of races in Yamaha heavy and light. and the last heavy Championship at oakwood(Jared Alseth driving it) I also finished 2nd the one race I ran it in open at oakwood with a competitive field). Also finished 3rd at the Big Kahuna after switching to this chassis after I lost my brakes on my other chassis so if I would have time to adjust the chassis a little more I would have had a chance to win.
This kart is a proven winner with multiply drivers on it the motors is the second highest hp number for a Yamaha I have ever had and the chassis is the most forgiving chassis I have ever raced it has all the best stuff on it you wont find a better kt100 kart around and the motor came from mike Collins who is the best motor builder around and maybe in the country. So for 1800$ your stealing it you couldn't build a copy for near that
It would cost 2003 Buller chassis $800 kt100 and pipe and carb $800, clutch $450, jack shaft with belt drive $350, wedge body and nose 350$ seat 250$ tires and wheels at least $200 aluminum fuel tank 60$ new brakes 200$
thats well over 3000$ to copy and this stuff is all like new
$1800 race ready is a steal
Billy 206-601-5387